Installing and adjusting the Flex-Fit frameless glass balustrade system requires two dedicated tools designed specifically for dry-glaze installations:
- The Combi-Tool
- The Flex-Fit Tool
While both tools are used during installation, they serve very different purposes. Understanding when and how to use each one helps ensure the system is installed correctly, safely, and efficiently.
The Combi-Tool – Multi-Purpose Installation Tool #
The Combi-Tool is the primary installation tool used throughout the fitting process. As the name suggests, it combines several functions into a single tool, making it one of the most useful accessories when installing Flex-Fit systems.

Securing the Glass During Installation #
Once the glass panels have been positioned and aligned within the channel, the system is locked in place using wedges.
The Combi-Tool is used to tap these wedges down into position, securing the glass firmly inside the profile.
Because the tool has a long handle, it allows installers to apply controlled force without needing to work directly over the channel.
This helps ensure:
- Even wedge installation
- Consistent pressure along the glass
- A secure and stable glass position
Installing the Final Userside Gasket #
On the opposite end of the tool is a gasket roller, designed to help install the final userside gasket.
This gasket seals the system and completes the installation.
The roller design allows installers to press the gasket smoothly into the channel, reducing the effort required compared to pushing the gasket in by hand.
One of the biggest advantages of the Combi-Tool is its extended length.
Unlike small handheld gasket rollers – which often require installers to kneel or bend down close to the channel – the Combi-Tool allows gasket installation from a more upright working position.
This makes the process:
- Faster
- More comfortable
- Less physically demanding during larger installations
Deglazing and Glass Replacement #
Another benefit of dry-glazed systems such as Flex-Fit is the ability to easily remove and replace glass panels if required.
For example, if a panel becomes damaged during installation or later on site, it can be removed without dismantling the entire system.
The Combi-Tool assists with this process.
The same side of the tool used for tapping wedges into place includes a hooked profile designed to catch underneath the internal wedge.
Using the leverage provided by the tool’s length, the wedge can be carefully lifted and prised out of the channel, allowing the glass panel to be removed safely.
This simple process is one of the key advantages of dry glazing systems compared with wet-glazed alternatives.
The Flex-Fit Tool – Glass Adjustment Tool #
While the Combi-Tool is used for general installation, the Flex-Fit Tool is specifically designed for adjusting the glass alignment.
The Flex-Fit system uses moveable adjustment components (often referred to as “boats”) within the base channel.
These components allow installers to make precise adjustments to the glass position after the panel has been installed.

How the Flex-Fit Adjustment Tool Works #
The Flex-Fit Tool is designed to locate around each adjustable boat within the system.
Once positioned correctly, the tool can be moved left or right, which in turn moves the internal boat component.
As the boat moves, the glass panel is adjusted either forward or backward.
This allows installers to fine-tune the alignment of each panel, ensuring the finished balustrade line remains straight and visually consistent.
Why Glass Adjustment Is Important #
Even with accurate setting-out, slight variations can occur during installation due to:
- Substrate tolerances
- Base level differences
- Glass manufacturing tolerances
- Building movement or irregularities
The Flex-Fit adjustment mechanism allows installers to compensate for these variations and achieve a perfectly aligned glass run without removing the panel.
Why Two Separate Tools Are Used #
Although both tools are used during installation, they serve different roles:
| Tool | Primary Purpose |
|---|---|
| Combi-Tool | General installation tool for wedges, gasket installation and deglazing |
| Flex-Fit Tool | Precision adjustment of the glass alignment |
Using the correct tool for each task ensures the system is installed efficiently while maintaining the performance and adjustability that the Flex-Fit system is designed to provide.
Summary #
The Flex-Fit system uses two dedicated tools to simplify installation and adjustment.
- The Combi-Tool is the multi-purpose installation tool used for securing wedges, installing gaskets, and removing wedges for deglazing.
- The Flex-Fit Tool is used specifically to adjust the position of the glass by moving the internal boat components.
Together, these tools allow installers to secure, adjust, and if necessary remove glass panels quickly and efficiently, which is one of the key advantages of dry-glazed frameless balustrade systems.