There are several frameless glass balustrade systems on the market that use an electric drill with attachment to move the glass into position.
Because Turbo-Flex also uses an electric drill and with attachment, it’s often assumed that it works in the same way.
It doesn’t.
This article explains how Turbo-Flex glass adjustment actually works – and why the process is often much simpler on site.
The Common Misconception #
Some systems use a drill to actively adjust the position of the glass by tightening or loosening internal packers.
With these systems, the packer itself controls the glass position.
With Turbo-Flex, the drill is not used to help adjust the glass position at all.
How Turbo-Flex Actually Works #
Step 1 – Position the Glass by Hand #
The glass is manually adjusted into position by physically moving it forwards or backwards until it is level and aligned.
- No mechanical adjustment
- No guessing which component to turn
- Full visual control during alignment
Step 2 – Lock the Glass in Place #
Once the glass is correctly positioned, the drill with the extender tool are used to secure the packers around the glass.
- The drill is only used for locking
- It does not move or adjust the glass
- What you see is what you lock in place
Why This Matters on Site #
Adjustment via Packers Can Be Unpredictable #
On systems where the packer controls the glass position, small adjustments can have unexpected results.
- Turning one packer may affect the entire panel
- Adjustments are not always linear or predictable
- You often need trial and error to get the correct position
Multiple Packers = More Complexity #
Most panels are supported by multiple packers, which can make adjustment more difficult.
- Should you adjust one packer or all of them?
- How much should each be adjusted?
- What happens if one is slightly out?
Risk of Over-Adjusting #
It’s easy to over-adjust when using a mechanical system.
- Small turns can create large movement
- You may correct one issue but create another
- Panels can end up chasing level back and forth
The Advantage of Manual Adjustment #
By adjusting the glass manually, Turbo-Flex removes this uncertainty entirely.
- You can see the exact position in real time
- Adjustments are immediate and intuitive
- No trial and error with hidden mechanisms
Summary: Key Difference at a Glance #
| Feature | Turbo-Flex | Other drill and bit attachment systems |
| How glass is adjusted | By hand | Via packers/mechanisms |
| Use of drill and attachment | Locking only | Adjustment + locking |
| Control during install | Visual and direct | Indirect/mechanical |
| Ease of use | Simple and intuitive | Can require trial and error |
Final Note #
The use of a drill across different systems can make them appear similar at first glance.
However, the role of that tool – and how the glass is actually adjusted – is fundamentally different.
With Turbo-Flex, adjustment is simple, visual, and fully in your control.